Skip to the content

The MegaFrame C-Series Door Frames

MegaMet-C-Series frames are designed for installation into steel stud or wood stud partitions after walls are built. C-Series frames are shipped knocked down for easy field assembly. Jamb depths available in 1/8” increments, and a variety of special face, rabbet, and return dimensions; along with special stop heights are available.

C-series frames shall be fabricated from quality grade 16-, 14-, or 12-guage cold rolled or hot-dip galvannealed steel (A-60) meeting the latest ASTM standards. ANSI/SDI A250.8 and NAAMM standard HMMA-860-865 will be followed. Computerized turrets die-miter the jambs and heads; gussets are then spot-welded in jambs for strong tight corners. Screw holes provided at head corners and in the face at the bottom of the jamb help finish the field installation. The C-series frames come with an additional back-bend made for slipping over sheetrock walls. Compression type wall anchors provided at the top of each jamb wedge the head in place.

All mortised hardware shall be precision pierced, reinforced, drilled, and tapped in accordance with HMMA-861 and definitions in ANSI A250.6 to manufacturer's templates. Reinforcements for template butts are heavy 7-guage steel, secured in place with reliable and consistent Projection type welders. Strike reinforcements shall be 16-guage, with extruded screw holes, prepared to dimensions and tolerances of ANSI/BHMA A156.115. Reinforcements in 12-gauge steel shall be provided for surface hardware.

Click the image to the left to download the AutoDesk DWF file for the C-Series door frames.  You will  need the free AutoDesk viewer to access this file.  Click HERE to download the free AutoDesk viewer application.




MegaMet Industries

3228 6th Avenue North
Post Office Box 635
Birmingham, AL 35201

Tel: 205-322-7700

Customer Service
Email Us


Order Entry

QC Issues - Form Submission

Job Status - Form Submission